Page 1 of 1

LED bar installation

Posted: Tue Mar 12, 2019 8:04 am
by majo72
I have a 120W Strands LED bar that I'm going to move over from my 2011 Passat to my 2019 Kodiak.
The relay kit is this: https://www.strandseurope.com/product/l ... fs-12-24v/
and I need to connect one of the cables to he main beam signal.
(On my Passat I simply connected it to the cable providing power to the main beam lens flip)
Constant voltage is required to activate output to the relay.

Any ideas?