LED bar installation

Audio, Navigation, Electronic Faults and Fixes
Post Reply
Posts: 3
Joined: Wed Feb 27, 2019 9:14 pm

LED bar installation

Post by majo72 » Tue Mar 12, 2019 8:04 am

I have a 120W Strands LED bar that I'm going to move over from my 2011 Passat to my 2019 Kodiak.
The relay kit is this: https://www.strandseurope.com/product/l ... fs-12-24v/
and I need to connect one of the cables to he main beam signal.
(On my Passat I simply connected it to the cable providing power to the main beam lens flip)
Constant voltage is required to activate output to the relay.

Any ideas?

Posts: 1
Joined: Sat Sep 12, 2020 11:15 am

Re: LED bar installation

Post by JohnB5319 » Sat Sep 12, 2020 11:19 am

Hi, did you ever resolve this issue? I’m interested in doing the same. I previously fitted a led bar to a Subaru Outback and I could simply use a H7 piggyback adaptor but this is a whole new world! Thanks.

Post Reply