LED bar installation

Audio, Navigation, Electronic Faults and Fixes
Post Reply
majo72
Posts: 3
Joined: Wed Feb 27, 2019 9:14 pm

LED bar installation

Post by majo72 » Tue Mar 12, 2019 8:04 am

I have a 120W Strands LED bar that I'm going to move over from my 2011 Passat to my 2019 Kodiak.
The relay kit is this: https://www.strandseurope.com/product/l ... fs-12-24v/
and I need to connect one of the cables to he main beam signal.
(On my Passat I simply connected it to the cable providing power to the main beam lens flip)
Constant voltage is required to activate output to the relay.

Any ideas?


Post Reply

Return to “Electronics and In Car Entertainment”